Products Details


Gearlube SP 100e Gear Oils

(Specialty Gear Oil) MOSIL Gearlube SP - 100e is a specialty gear oil formulated with highly refined mineral oil along with latest additive technology with friction modifiers to provide high performance and long service life due to lower sludge formation. It contains sulphur - phosphorus chemistry of EP additives that provides high load carrying ability and wear protection. MOSIL Gearlube SP - 100e gear oil is formulated with special additive system to resist micropitting in gears and provides protection against corrosion of steel and copper containing alloys. It resists foaming and can be used in either splash or circulating system. MOSIL Gearlube SP - 100e gear oil is suitable wherever Industrial Gear oil is required. It is suitable for the lubrication and protection of enclosed gears including spur, helical and bevel designs besides providing protection against shock loading generally observed in worm gears. It can also be used for lubrication of plain bearings and in rolling contact (anti friction) bearings.

AREA OF APPLICATION

Enclosed Gear drives, Transmission chains, Low speed antifriction bearing, Centralized lubrication systems. As a running-in-oil for OEMs. Can also be used for Industrial bearings (journal and rolling contact), drives for conveyors, agitators, dryers, mixers, pumps etc.

BENEFITS

-    Resists Micropitting, provides EP wear protection to gears, bearings etc.
-    Resists sludge formation leading to outstanding system cleanliness.
-    Very good oxidation resistance for long drain interval
-    Very good demulsibility for easy water removal
-    Lead Free

PACKING

20 Ltr Pail, 35 Ltr Drum, 210 Ltr Barrel

Owing to evolving packaging solutions, user is requested to kindly check the availability of a specific pack size prior to standardization.

CHARACTERISTICS TYPICAL VALUES
Appearance Clear
Colour (Visual) Pale Yellow to Brown (minor variation in colour has no effect on the performance of the product)
Kinematic Viscosity at 40°C (cSt) 101.8
Kinematic Viscosity at 100°C (cSt) 14.9
Viscosity Index 96 (typical)
Copper Strip Corrosion ASTM 1a
Density at 15° C 0.88
Flash Point °C (COC) 226°C (min)
FZG (Failure Load Stage)A/8.3/90 12+
Rust Protection, Sea Water, ASTM D - 665 Pass

Download TDS


Material Safety Information required for safe usage of this product may not be included in this product bulletin and may be sought by contacting MOSIL. Users are advised to go through the Material Safety Data Sheet (MSDS) of this product prior to application / usage of this product.

*All statements and information contained in this document are based on the laboratory testing and user experience on actual applications. Owing to the exhaustive possibility of application for which this product may be used and the variety of equipments, performance parameters, environmental conditions and unpredictable human factors, we strongly recommend that this product be tested on the actual application prior to its standardization. All information contained herewith is offered in good faith but without any expressed or implied warranty. This Product Bulletin may already have been revised considering the availability of raw components, legislation, user experience & expectations and enhancement of knowledge of the development team of MOSIL. Users are requested to kindly seek the latest version of this product bulletin by contacting MOSIL. Information provided in this Product Bulletin is based on the generalised expectations and requirements of users. Additional information for this product may also be sought by contacting MOSIL.