Products Details


SPRAY 315

(Red Insulating Varnish) It is a highly insulating varnish in convenient aerosol form. It is a high gloss red colour high temperature flexible chemical resistance coating to Class F winding or electrical apparatus. It is specially designed for protection and sealing of insulated surface against deterioration, exposure to oil, moisture, acid and alkaline fumes.

AREA OF APPLICATION

Can be used for protection of commutator end, switch board parts, leads, motor case interiors, collector rings and shells, armature, bus bars, field winding of motor starters and generators etc. Note: To properly clean and prepare surfaces, use Mosil SPRAY – 18 prior to application of the spray.

BENEFITS

-    High arc resistance and dielectric strength.
-    Resists current leakage.
-    Protects against moisture and corrosion.
-    Quick drying.
-    Resists chemical and moisture.
-    Excellent Adhesion.

PACKING

500ml Eco-friendly Aerosol Spray

Owing to evolving packaging solutions, user is requested to kindly check the availability of a specific pack size prior to standardization.

CHARACTERISTICS TYPICAL VALUES
Appearance Dry Glossy Film
Colour Red
Specific Gravity at R. T. 0.85 ± 0.05
Odour Typical (solvent)
Insulation Class – F
Drying Time for handling 25 – 30 minutes
Film Type Dry
Dielectric Strength 2100 volts per mil (min),90 kV / mm (min) in air
Solvent Resistance Good
Moisture Resistance Excellent
Temperature Range -40 to 150°C
Propellant Propane – Butane (( Flash Point below -7°C Boiling Point below -18°C)
Container Aerosol tin with 25mm valve and actuator

Download TDS


Material Safety Information required for safe usage of this product may not be included in this product bulletin and may be sought by contacting MOSIL. Users are advised to go through the Material Safety Data Sheet (MSDS) of this product prior to application / usage of this product.

*All statements and information contained in this document are based on the laboratory testing and user experience on actual applications. Owing to the exhaustive possibility of application for which this product may be used and the variety of equipments, performance parameters, environmental conditions and unpredictable human factors, we strongly recommend that this product be tested on the actual application prior to its standardization. All information contained herewith is offered in good faith but without any expressed or implied warranty. This Product Bulletin may already have been revised considering the availability of raw components, legislation, user experience & expectations and enhancement of knowledge of the development team of MOSIL. Users are requested to kindly seek the latest version of this product bulletin by contacting MOSIL. Information provided in this Product Bulletin is based on the generalised expectations and requirements of users. Additional information for this product may also be sought by contacting MOSIL.