Products Details


BRB 400

(Heavy Duty / High Temperature Grease) It is an E.P. Moly grease specially formulated from complex soap blended with special chemical additives to meet the most adverse conditions in industrial environment. It has a very good affinity towards all the metal surfaces under critical conditions i.e. it forms and maintains a film highly adhesive to the bearing surface reducing friction and wear.

AREA OF APPLICATION

For Ball and Roller bearings operating under high speed and high temperature, King pins, Ball joints, Gears, Linkages, Speed reducers, Stenter fan bearings etc.

BENEFITS

-    Heavy duty/High temperature grease.
-    Highly adhesive.
-    Reduces maintenance downtime.
-    Operates effectively under adverse conditions.

PACKING

1 Kg Jar, 20 Kg Pail

Owing to evolving packaging solutions, user is requested to kindly check the availability of a specific pack size prior to standardization.

CHARACTERISTICS TYPICAL VALUES
Appearance Smooth Homogeneous Grease
Base Lithium complex
Colour Black to Gray Black(minor variation in colour has no effect on performance of the lubricant)
Specific Gravity 0.90 ± 0.05
Drop Point 260°C (min)
Consistency (NLGI) # 2
Worked Penetration 265 – 295
Base Oil Viscosity (cSt) 40°C 210
Base Oil Viscosity (cSt) 100°C 18.4
Flash Point of Base Oil, °C 240 (min)
DN Factor 400000
4 Ball Weld Load (kg) 315 (min)
4 Ball Wear Scar (mm) 0.45 (max)
Copper Strip Corrosion Negative
Oxidation Stability (psi) 2.34 (max)
Yield Pressure at 250°C (lb / in2) 400
Water Resistance Excellent
Evaporation Loss at 200°C, % 12.58 (2 hrs) ; 16.07 (4 hrs)
Temperature Range -25°C to 260°C
Dynamic Viscosity at 25°C, 1500 Pa 0.3 - 0.45 x 106 CPS
Absolute Viscosity at 80°C 0.7 x 106 CPS (typical)
Absolute Viscosity at 140°C 0.17 x 106 CPS (typical)
Endurance Test at 100°C, 710 Mpa, 2500 sec null
- Coefficient of Friction 0.1 (max)
- Scar on Pin, mm 0.7 (max)
Performance on Regular Cyclic Shock Load 70°C, Phase - II
- Modulus Recovery in 100 sec, % 90

Download TDS


Material Safety Information required for safe usage of this product may not be included in this product bulletin and may be sought by contacting MOSIL. Users are advised to go through the Material Safety Data Sheet (MSDS) of this product prior to application / usage of this product.

*All statements and information contained in this document are based on the laboratory testing and user experience on actual applications. Owing to the exhaustive possibility of application for which this product may be used and the variety of equipments, performance parameters, environmental conditions and unpredictable human factors, we strongly recommend that this product be tested on the actual application prior to its standardization. All information contained herewith is offered in good faith but without any expressed or implied warranty. This Product Bulletin may already have been revised considering the availability of raw components, legislation, user experience & expectations and enhancement of knowledge of the development team of MOSIL. Users are requested to kindly seek the latest version of this product bulletin by contacting MOSIL. Information provided in this Product Bulletin is based on the generalised expectations and requirements of users. Additional information for this product may also be sought by contacting MOSIL.