Products Details

SAM HT - 4800

(Chain Lubricant) SAM HT-4800 is a high temperature, high load chain oil formulated with proprietary additives to function over a wide temperature range of -10°C to +200°C. It can be applied by brush lubrication, drip feed lubrication or through Central Lubrication system by means of a grease pump. SAM HT-4800 is extremely adhesive, extremely noise dampening, wear and corrosion Resistant.


SAM HT-4800 can be used for open running and high speed chains; SAM HT-4800 resists splashing and dripping. It also resists the centrifugal action. It is suggested to use SAM HT-4800 SL when a new chain is to be lubricated for the first time. Prior to startup immerse the chain in the SAM HT-4800 SL bath, the solvent will slowly evaporate leaving the chain coated with an adhesive lubricating film. For re-lubrication of chains concentrated version SAM HT-4800 should be used.


20 Ltr Pail

Owing to evolving packaging solutions, user is requested to kindly check the availability of a specific pack size prior to standardization.

Appearance Adhesive Honey like oil
Color Dark Yellow(minor variation in color has no effect on the performance of the product)
Density at 15° C 0.90 ± 0.05
Viscosity at 40°C 4600 - 4900 cSt.
Viscosity at 50°C 2400 - 2600 cSt
Viscosity at 100°C 200 - 220 cSt
Viscosity Index 150
Flash Point 250°C
Pour Point < -12 °C

Download TDS

Material Safety Information required for safe usage of this product may not be included in this product bulletin and may be sought by contacting MOSIL. Users are advised to go through the Material Safety Data Sheet (MSDS) of this product prior to application / usage of this product.

*All statements and information contained in this document are based on the laboratory testing and user experience on actual applications. Owing to the exhaustive possibility of application for which this product may be used and the variety of equipments, performance parameters, environmental conditions and unpredictable human factors, we strongly recommend that this product be tested on the actual application prior to its standardization. All information contained herewith is offered in good faith but without any expressed or implied warranty. This Product Bulletin may already have been revised considering the availability of raw components, legislation, user experience & expectations and enhancement of knowledge of the development team of MOSIL. Users are requested to kindly seek the latest version of this product bulletin by contacting MOSIL. Information provided in this Product Bulletin is based on the generalised expectations and requirements of users. Additional information for this product may also be sought by contacting MOSIL.